F-10 Local Alarm System is applied for the large-scale buildings such as commercial office buildings, shopping malls and research institutes. It is not only designed for the Security Management, but also for Access Control System, Key Deposit and Facility Management System. F-10 Local Alarm System can provide maximum security and convenience for the tenants and/or visitors of the building with most reliable and intelligent network features.

@

@

F-10 SYSTEM WAS ORIGINALLY DEVELOPED ON THE BASIS OF THE FOLLOWING THREE KEY CONCEPTS;

@

FEATURES

1. Solution for deversified and up-to-date requirements

@

@

Operation Terminal - individual block terminal

Operation Terminal

©

OT-06^OT-06S ¨

@

@

@

@

@

@

@

*OT-06 is approved as JMT Good Design Product.

@

Operation Console - unified terminal


@

All functions of 32pcs OT-06 are unified into this terminal. Entry and exit zone can be assigned and controlled.

Operation Console OC-32/32S (OC-32S is order made)

*OC-32 is approved as JMT Good Design Product.

@

@

@

Simultaneous Usage - three way operation

Operation terminal OT-06 and operation console OC-32 can be used together in a system.

@

@

Key Deposit management

@

10 blockes key deposit system

@

@

@

@

2. Quest for false alarm reduction

@

Minimal mistake in operation

LCD display and voice guidance minimize the mistakes in user's operation.

@

User Identification

Use's ID can be specified.

@

Detaled Information

The system descriminates burglar alarms from system disqualification alarms (line failure,

communication error, harmful environment charge and so on).

@

3. Efficient and labor-saving management

@

ID card registration

ID card registration and/or cancellation can be executed remotely throught F-10 Local Station.

@

Change of zone assignment

Security block and zone assignment would be changed remotely throught F-10 Local Station.

@

Remote control

F-10 Local Station arm/disarm the particular security block, control electric lock.

@

Shunt (By-pass)

F-10 Local Station can remove the defective detector from the alarm system,

but the remainder of the system can continue to provide protection.

@

Labor cost reduction

ADPLEX multiplex communication system can be connected each detector over 2-wire shielded cable,

Saving your time and money in installation.

@

SPECIFICATIONS

Security Block
  • Access control

MAX 128 security blocks can be registered. (optional 256 blocks)

*Security block means one protection area, which is devided in a large- scale building.

KAC-4000C can give an access authority to 4,000 people.

2pcs KAC-4000C can be connected.

  • Grouping
  • ID card capacity

For easy operation, security blocks can be grouped up to 16.

(Optional 32 groups)

MAX 10,000 users can be programmed in 1 set F-10 Local Station.

MAX 500pcs ID cards can be registered per one LCC.

  • Sensors
  • Applicable card

MAX 640 sensors can be connected.

*By using various sensor input device (AI-16, DSI-16, UNC-32), 80 sensors can be connected to one LCC local communication controller.

KTK original barium ferrite magnetic card ot JIS-2 magnetic stripe card can be used.

  • Location on the map
  • ID card data

You can easily find out an alarm location with MAX 20maps of F-10 Local Station.

(Optional 32 maps)

ID card data is composed of 8 digits.

PIN (personal identification number) code is composed of 4 digits.

  • LCC - Local Communication Controller

MAX 8pcs LCC local communication controller can be connected to 1 sets F-10 Local Station.

@

@

Go to System Configuration(pdf file 585KB)

@

@ Back to Home